1 200 MPa级冷轧先进高强钢轧制稳定性的分析及控制

针对1 200 MPa级冷轧先进高强钢轧制不稳定问题,对热轧原料组织性能均匀性、冷轧压缩比、冷连轧机组轧制策略等进行了分析。结果表明,热轧工序投入边部加热器,采用分段冷却等手段,可有效降低热轧原料头尾部组织性能差异,保证通卷性能均匀,进而保证通卷轧制过程稳定;通过优化冷连轧机组压缩比,可有效降低材料本身的加工硬化强度,进而避免连轧机组后面机架的轧制超负荷情况;通过优化冷连轧机组轧制策略,可保证轧制过程中各机架均匀变形,避免出现轧制力差异较大的情况,进而保证轧制过程稳定。采用上述措施,1 200 MPa级冷轧先进高强钢轧制力控制在约15 000 kN,厚度精度控制在±0.06 mm以内,可保证该级别高强钢的稳定轧制。     

Ultra-thin Laminated Metal Composites with Ultra-high Strength and Excellent Soft Magnetic Properties

Structural metallic materials with excellent functional performance and lightweight features have always been the goal of material scientists' pursuit.In this work,laminated metal composites of different thicknesses(less than 0.4 mm) composed of structural materials with great differences in deformation ability were successfully fabricated via a novel processing procedure.Ultra-high strength and excellent soft magnetic properties were combined perfectly in the ultra-thin and super-light laminated metal composite strips due to unique structural design and essential attributes of the initial materials.These results emphasize the significant potential application value of the ultra-thin laminated metal composites in the field of structural and functional integration.     

AA7075高强铝合金热冲压流变行为本构模型对比研究

在热冲压过程中,AA7075高强铝合金板料经充分固溶后移入室温模具进行冲压成形并淬火。为表征AA7075铝合金在热冲压工艺中的变形行为,在温度200~480℃、应变速率0.01~10s-1范围内进行了高温拉伸试验。基于Arrhenius类型本构模型、Johnson-Cook模型以及Zerilli-Armstrong模型提出了多种修正本构模型,并应用实验所获流变曲线进行了拟合。提出的修正模型通过将模型参数表示为应变、应变速率及温度相关的多项式函数耦合了应变、应变速率及温度对流变应力的影响,并通过均方误差(MSE)以及相关系数R值对模型流变应力预测准确性进行了评价。结果表明,修正的Johnson-Cook模型能够更加准确的预测AA7075高温流变行为。     

Effects of cross rolling on texture,mechanical properties and anisotropy of pure Mo plates

To clarify the influence of the deformation texture on the mechanical properties, pure Mo plates were processed by various cross rolling procedures, and the relation among texture, microstructure and mechanical properties was discussed. The results show that cross rolling of the Mo plates is beneficial for the formation of the rotated cube component, i.e., {001}〈110〉. The corresponding orientation density exhibits a positive correlation with the total rolling deformation and the current-pass deformation. When the total deformation is 96% or greater, the Mo plates form a texture orientation dominated by {001}〈110〉, whereas the γ-fibre texture becomes weaker and the cube texture {100}〈100〉 disappears completely. The presence of {001}〈110〉 has great effects on the properties of cross-rolled Mo plates, which is beneficial for strength enhancement and plasticity reduction in both the rolling direction (RD) and the transverse direction (TD).     

Strategy to design high performance TiB2-based materials: Strengthen grain boundaries by solid solute segregation

TiB₂ exhibits a unique combination of excellent properties that make it promising candidate for applications in extreme environments, where retention of strength at high temperatures is essential. Tailoring grain boundary properties by segregation is believed a prominent way to design high-temperature performance of ceramics. In this work, segregation tendencies of solute elements, including Sc, Y, Zr, Hf, V, Nb, Ta, Cr, Mo, and W, in TiB₂ grain boundaries and the strengthening/weakening effects induced by segregations are investigated by first-principles calculations. The results reveal that small atoms tend to segregate to grain boundary sites with local compression strains, while large atoms prefer grain boundary sites with local expansion strains. Deteriorated grain boundary strength is usually caused by additional expansion strain induced by segregation, while improved grain boundary strength results from either enhanced local bonding induced by segregation of small atoms or increased fracture strain due to segregation of large atoms. Cr and V, especially Cr, exhibit strong segregation tendency and improvement on grain boundary strength, which provides useful guidelines for the design of high performance TiB₂-based materials.     

吴庄铁矿盘区间柱回采优化研究

基于吴庄铁矿盘间柱宽度不确定性、两侧均为充填体且高度大的现状，为安全高效回采盘区间柱，制定了盘区间柱两侧采场充填体取芯设计方案，并对充填体进行制样，进行了实验室试块抗压强度试验。试验结果表明：一步骤采场（矿柱）充填体强度整体符合设计强度要求，二步采场充填体强度整体偏低，盘区间柱宽度较设计变化较大，宽度极其不规整，整体呈上窄下宽的规律。鉴于盘区间柱宽度不规则、二步骤采场充填体强度低于预期、采场高度大和盘区间柱回采时不能大面积暴露的特点，采用留设一定厚度间柱和采用较小采场长度的措施进行回采方案制定，制定了小采场分段空场嗣后充填法回采方案。该方案的制定和实施，对于其他类似地下矿山三步骤间柱回采工程具有借鉴意义。     

利用表面硬度值间接获取镐形截齿钎焊层力学性能的方法研究

利用维氏硬度实验和数值模拟相结合的方法,间接得出了截齿表面各区域材料所对应的屈服强度值,建立了一种由实验硬度值HV获取截齿焊接接头等不易测量区域力学性能参数的方法。     

Transient liquid phase diffusion process for porous mullite ceramics with excellent mechanical properties

Porous mullite ceramics were fabricated by the transient liquid phase diffusion process, using quartz and fly-ash floating bead (FABA) particles and corundum fines as starting materials. The effects of sintering temperatures on the evolution of phase composition and microstructure, linear shrinkage, porosity and compressive strength of ceramics were investigated. It is found that a large amount of quartz and FABA particles can be transformed into SiO₂-rich liquid phase during the sintering process, and the liquid phase is transient in the Al₂O₃-SiO₂ system, which can accelerate the mullitization rate and promote the growth of mullite grains. A large number of closed pores in the mullite ceramics are formed due to the transient liquid phase diffusion at elevated temperatures. The porous mullite ceramics with high closed porosity (about 30%) and excellent compressive strength (maximum 105?MPa) have been obtained after fried at 1700?°C.     

Liquid phase sintering and characterization of SiC ceramics

The present study focuses on the sintering of silicon carbide-based ceramics (SiC) by liquid phase sintering (LPS) followed by characterization of the produced ceramics. AlN/Re₂O₃ mixtures were used as additives in the LPS process. In the first step, the LPS-SiC materials were produced in a graphite resistance furnace in the form of discs at different temperatures. The conditions with the best results regarding real density and relative density were taken as reference for sintering in the form of prismatic bars. In the second step, these samples were evaluated regarding fracture toughness (K_IC), by the Single Edge V Notch Beam – SEVNB – method, and flexural strength. K_IC behavior was evaluated according to the depth and curvature radius of the notches. Reliable K_IC values were presented when the ceramic displayed a small curvature radius at the notch tip. When the radius was large, it did not maintain the square root singularity of the notch tip. Tests were carried out to determine K_IC values in atmospheric air and water. K_IC results were lower in water than air, with a decrease ranging between 2.56% and 11.26%. The observations indicated a direct grain size correlation between K_IC values and fracture strength of the SiC ceramics.